Guides · Room requirements by launch monitor
How Much Room Does a GOLFZON TwoVisionNX Need?
Published · Updated
A North American TwoVisionNX layout needs at least 10 feet 8 inches of height, 14 feet of width for both-handed play, and 15 feet 3 inches of depth plus a 3- to 5-foot safety zone. For right-handed play only, the minimum width is 13 feet 3 inches; height and depth stay the same. Use those figures to screen the room, then build from the installer's drawing for your exact screen, moving plate, projector, access, and finish.
Depth: 18 feet 3 inches and up
GOLFZON lists a depth range of 15 feet 3 inches to 17 feet 3 inches, with a further 3- to 5-foot safety zone. Adding those allowances gives 18 feet 3 inches at the smallest combination and 22 feet 3 inches at the largest. The installer needs to identify that zone on your floor plan. GOLFZON's North American space guide
These figures apply to TwoVisionNX. TwoVisionNX Standard has its own dimensions, so don't substitute its plan when ordering the moving-floor system.
The ceiling
The published height range is 10 feet 8 inches to 11 feet 3 inches. These are system planning dimensions; they don't prove that every golfer can swing safely in a room at the minimum. GOLFZON's height requirements
Measure to the lowest thing hanging down. A beam, duct, light, or soffit sets the usable height, whatever the drywall says. Ask the installer how the finished platform height affects the space above your head and club.
14 feet, or 13 feet 3 inches for right-handers only
Both-handed layouts start at 14 feet wide and right-handed-only ones at 13 feet 3 inches. The published upper width is 19 feet for either layout. GOLFZON's layout dimensions
If left-handed family, guests, or customers might play, include them in the initial drawing. An offset right-handed hitting position needs a separate clearance check before anyone swings from the other side.
A floor that moves
TwoVisionNX supports Motion Plate and Dual Plate moving floors, alongside multi-surface hitting and an auto-tee system. Confirm the selected floor in your order. GOLFZON's system comparison
Put the floor, power, data, and service access on the room plan from the first sketch. In a finished space, find out what has to be cut, mounted, or rewired before you order the system, and have a licensed electrician handle any rewiring.
If the room only just fits
If any dimension falls below the published range, ask GOLFZON whether another configuration fits before committing to construction. Even when the measurements clear the minimums, have the installer check the actual golfers' swings, finished surfaces, and obstructions against the configuration drawing.